|
|
| We
decided to keep the top part of the dash and weld a piece
of angle iron on the bottom for mounting the lower part. |
|
|
|
| Now
we decided on Classic Instrument gauges, so we laid out
the dash patterns. We cut out a piece to be welded
into the old hump. |
|
|
|
| Here
is the hump from the passenger side has been removed and
the replacement piece fabricated.
|
|
|
|
| You
can see the new piece has been welded into the hump and
the hump on the driver side has been widened by 2 inches.
That is because the piece of woo |
|
|
|
| New
piece welded in and ground smooth. |
|
|
|
| Kinda
looks like Tim has alien tendencies. |
|
|
|
| With
the passenger side widened and going to 5 inch gauges this
is going to look really great. |
|
|
|
|
|
|
|
|
|
|
|
|
More
to Come
|
|
|
