|
|
| While
we're waiting on the custom framerails, we'll start
modifying the cowl. We start by grinding the gelcoat on
the cowl and sides. |
|
|
|
| Now
we have to build it up with fiberglass to get it flat. |
|
|
|
| Now
the fiberglass is ground down. |
|
|
|
| The
beltline is duplicated with fiberglass. No bondo was used
for this step. |
|
|
|
| Here's
the completed cowl. |
|
|
|
| The
framerails are going in the jig to start the chassis
buildup. |
|
|
|
| Both
rails are in the jig. |
|
|
|
| First
we need to get the chassis centerline. We do this by
running a string from the center of the jig the entire
length of the jig. Since these are custom rails, (34 in
the back, pinched 32 in the front) we'll need to custom
jig the front of the rails. |
|
|
|
| Now
we'll cut the rear of the frame off and move it in. |
|
|
|
|
|
|
Next-->
|
|
|
