|
|
| Here's
the frame after welding and smoothing. |
|
|
|
| Jaysun
puts the rear end under the chassis with the tires mounted
up. |
|
|
|
| The
Heidt's front suspension is being installed. The
crossmember is tacked in place and the suspension
components are being bolted in place. |
|
|
|
| Back
at the rear, we need to make the four bar work with the
stepped in frame. We start by welding 3/8" plate
steel on each side of the frame where the mounting lug
will be for the top bar. |
|
|
|
| Steel
plate is welded onto each side of the frame rail. |
|
|
|
|
|
|
| Jaysun
drills the hole where the mounting lug will go. |
|
|
|
| The
hole goes all the way through the frame and both steel
plates. |
|
|
|
| The
mounting lug is tacked into the frame. |
|
|
|
|
|
Next-->
|
|
|
