|
|
| And
the driver's side motor mount. |
|
|
|
| Now
we need to build the center crossmember. The transmission
is bolted up to a lower tube crossmember. |
|
|
|
| Behind
the transmission, we bend a lower tube with a drop down to
clear the driveshaft. |
|
|
|
|
|
|
| The
long level ensures that all the tubes are flush with the
top of the frame rails. |
|
|
|
| We
gusset the tubes with up and down tubes. |
|
|
|
| Almost
ready to weld it up. |
|
|
|
| Now
we set the body back on. |
|
|
|
| The
front spindles are going on. |
|
|
|
|
|
Next-->
|
|
|
