Alright
the pictures are out of sequence again, pretend the one
below is the first one.
Okay,
now we have it right. Gees
A/C,
wiring
Now
you know why we have those wires to pull these wires
through.
Here
are the wires that come up to the trans tunnel.
Now
you can see why we put a piece of wood on the
firewall. Here is a grounding block where we run all
of the gorunds to.
Now
we have pulled wires through the back of the car.
Eric
has done a nice job of keeping the wires and the overflow nice and
neat.
The Vintage A/C
evaporator is mounted to the wood on the firewall and the metal
tube that runs under the dash. Also to the piece of steel in
the kick panel.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)