Robert Goswick's '34 Ford Coupe

Robert Goswick's '34 Ford Coupe

Construction Pictorial

Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Robert wanted a different type of dash that swooped down.

We laid up a flat piece of fiberglass, then glassed it to the front and back side of the dash.

We laid tape on it to get an idea of how the gauges are to be set in the dash.

Now we started the lip on the bottom of the dash.

From this view you can get a better idea of what we are accomplishing.

A little bondo smoothes out the fiberglass.

We fabricated a cardboard template, then cut the holes out and set the gauges in.

Now that it is in primer, you really get where we are going with this.

Now we are checking the shifter clearance, and angle of the steering column.

Hard to see, but we just installed the Hi-Tech third brake light.

Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30