|
| We
remove the original a-arms. |
|
|
|
| Here's
one of the narrowed a-arms that Heidt's makes as a direct
replacement for the original Mustang II. |
|
|
|
| This
spacer needs to be welded on for the lower a-arms. |
|
|
|
| Now
we paint them before installing. |
|
|
|
| Here's
the finished installation. This will move the tires
5/8" further in. |
|
|
|
| Sometime
in the life of this rod, someone installed some kind of
weird disc brake setup on the back. We could not find any
replacement parts to rebuild them. We will need to cut the
bracket off that has been welded to the housing. |
|
|
|
| With
the bracket removed, we need to restore the bolt pattern
of the original rearend. |
|
|
|
| We've
welded it up and restored the holes. |
|
|
|
| The
Wilwood rear brakes are being installed. |
|
|
|
| Here's
the finished installation. |
|
|
|
| Mike's
car is completed and ready to be picked up. |
|
|
|
|
|
|
|
|
|
