|
|
| Here's
the bracket tacked into the frame and the rod connected.
We'll need to add some gussets and then weld it up. |
|
|
|
| We
cut a hole in the floor for the booster/mc to stick
through. |
|
|
|
| Here's
the cover we made to cover up the booster and master
cylinder. |
|
|
|
| After
we fabricated the brake booster brackets, the frame was
sent out to be blasted. |
|
|
|
| The
suspension parts were also blasted and will be painted to
match the frame. |
|
|
|
| The
door jambs and firewall are ready for painting. |
|
|
|
| The
silver paint has been sprayed on the door edges. The car will
be a two tone silver and blue. |
|
|
|
| The
trunk lid has been painted on the inside and around the
edges. |
|
|
|
| The
blue has been sprayed on the edges of the doors. |
|
|
|
|
|
|
Next-->
|
|
|
