|
|
| The
side jig's hold the frame rails in position during boxing
to maintain their shape and keep them in the right
position on the jig. |
|
|
|
| Here
you can see the boxing plates tacked in place. |
|
|
|
| Here's
a closer look showing the fit and the tack welds spaced
out. |
|
|
|
| Once
the boxing plates are completely tacked, we weld them up
by stitch welding them. |
|
|
|
| Here's
the finished boxing plates welded in. The next step is to
grind them smooth. |
|
|
|
| The
'32 three window body was placed on the frame to make sure
that everything was lining up correctly and then removed
again. |
|
|
|
| The
front and rear crossmembers are welded in and the tubular
center crossmember is tacked in place. The front notch has
also been started. |
|
|
|
| The
rear of the frame has been c-notched for axle clearance. |
|
|
|
| The
center crossmember is welded in. |
|
|
|
Page 1
2
3 4
Next-->
|
|
|
