|
|
| A
closer look shows you where the trans cooler is mounted. |
|
|
|
| Here's
Larry working...finally. |
|
|
|
| Here's
our after school helper "Pretty Boy" alias Clay
Morton dusting off the frame. |
|
|
|
| Here's
what's going under the dash. The A/C is mounted and the
wiring is being run. |
|
|
|
| The
fuse box and Optima battery are mounted in the passenger
side of the trunk area. |
|
|
|
| The
"Blade Runner"! Here's another shot of the gas
tank installed with the braided fuel lines running from
the tank. |
|
|
|
| The
master cylinder and booster was replaced with one of Tuff
Stuff's new chrome dual booster and master cylinder units. |
|
|
|
| We
had to fabricate a bracket to hold the emergency brake
cable on the rear brakes. |
|
|
|
| Here
you can see the shifter and the emergency brake handle
mounted to the torque tube. |
|
|
|
| And
here's the holes in the body where they'll pass through. |
|
|
|
| The
next step for Lonnie's car is the FLAME SHOP! We're
loading it up and taking it to Cincinnati to have the
flames applied. The sides have been scuffed and the
chassis thoroughly wrapped to protect it from overspray.
The flames will be applied by Bill Roell AKA "Short
Round" and Dauber. These guys do some fabulous flames
and have done several high profile cars. |
|
|
|
|
