|
|
| Here's
the Viper's chassis. Pinched in the front with a
Heidt's open wheel front end, and a 9" Ford
rear out back. |
|
|
|
|
| As
projects go together, we all change our minds
about some things. In this case, Jeff decided he
wanted to use the simulated Halibrand center
section so the shock crossmember will have to be
redone. |
|
|
|
|
| Here's
the new crossmember and the old one. The loop
will clear the Halibrand cover. |
|
|
|
|
| Here's
the finished look. Everything clears fine
now. |
|
|
|
|
| The
body is installed on the frame and the engine
lowered in place to fabricate the motor
mounts. |
|
|
|
|
| Here's
a shot of the trunk lift installed. And a bunch
of goodies in the boxes! |
|
|
|
|
| Now
the hood sides are being fabricated. |
|
|
|
|
| This
is a shot of the car being mocked up before
fitting and priming. |
|
|
|
|
|
|
|
|
| To
get the look Jeff wants for his Viper, the rear
fenders have to be widened. We split them down
the middle and added fiberglass to get the right
width to clear the tires. |
|
|
