|
|
| The
boxing plates are stitch welded in place. |
|
|
|
| Jaysun
is doing the final grinding on the boxing plates. |
|
|
|
| The
lower section of the center crossmember is being fitted to
the chassis. |
|
|
|
| The
rear of the frame is cut off so we can move it in for tire
clearance. |
|
|
|
| Here's
the rear of the frame rails. We'll be moving the back of
the frame in to clear the big Hoosier radials. |
|
|
|
| The
back of the frame is crossed over with tubing and the rear
frame rails are welded back on. The center of the cross
tube will be opened up for the driveshaft. |
|
|
|
| The
front crossmember is tacked in. |
|
|
|
| Meanwhile,
over at Steve Schmidt Racing Engines, their crew is busy
assembling the engine that will be going into Merritt's
car. |
|
|
|
| Here's
a shot of the bottom end. |
|
|
