Troy Shuttelsworth 32 three window

Shuttelsworth 32 Ford three window

Construction Pictorial

Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Got to make sure the headers clear the frame

Heidts super ride front end installed and welded in place

We mocked up the transmission so we could start making the center cross member and transmission mount

Here is another look from a different angle

After we pulled out the transmission we started to weld the center cross member

We made a hatch to run the break lines thru because on the original frame the break lines were against the header

Here we have are little door all finished

The original car was pied so we had to do the same thing to match the original chassis

We cut out a big hole in the frame so we could fish mouth are pied frame for extra support

Here is another from the other side

Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22