Here's
a view of what it looks like from the trunk.
And
this is what it looks like from the inside of the car.
We
used the floor mount shifter rather than the trans mount.
The floor mount lets us move the shifter anywhere.
Brian
supplied us with this console.
We
had to cut a hole for the brake pedal and mount the gas
pedal too.
Now
we had to cut a hole for the latch release so we can
release
the hood from the inside.
The
hood release is now installed and ready for some use.
As
you can see we put a 1/8'' thick peace of wood inside the
top part of the fire wall this helps us with the
installation
of the Vintage Air A/C unit.
The dash is put back in place to hide everything.
Scott
and Chad are making sure all the gaps are still perfect
before they take the body back off the frame.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)