Return to page 7 Go to page 9
The seams were sanded down to prepare for some fiberglass reinforcement strips.
The seams are reinforced with fiberglass.
Some seams needed to be fixed on the bottom tail pan.
After the seams were fiberglassed in place, we used roll primer to help seal things up.
After the cowl lips and seams were all finished it was time to finish smoothing up the cowl.
A view before we put the filler on the cowl.
The filler was put in place and sanded smooth.
Side view of the hood showing the nice line of the body.
Here's Billingsley's new 408 Stoker Blueprint racing motor.
Here's a side view of the motor.
Here's a rear view of the motor.
Timing cover and water pump gaskets installed.
Timing cover installed.
Water pump installed.
A/C compressor installed.
Alternator bracket installed.
Spacer plate for the Ford motor and transmission.
Motor and transmission getting lined up.
Motor and transmission bolted together.
Click here to go to next page.