Return to page 9 Go to page 11
Another view of the tunnel formed off the mold.
The fiberglass tunnel is trimmed to fit.
Tunnel was set for a trial fit.
Tunnel is glassed in place.
View of the front.
View of the front after trimming.
Driver side firewall sanded smooth.
Front firewall tunnel glassed in place.
Passenger side firewall sanded smooth.
Firewall smoothed over.
Rear deck lid lip sanded smooth.
Rear deck lid hinges mounted in place.
Here's a look at the under side before we fabricate the new exhaust.
Another view of the under carriage.
Here's a picture of the new Dakota Digital exhaust diverter system.
A look at the muffler.
This new exhaust diverter system will let the exhaust go from muffled to un-muffled at the push of a button.
To make the diverter system work we have to run two exhaust pipes.
View of the new exhaust from the rear.
Here's a look at the new exhaust from the quarter bottom.
View of the new exhaust from the bottom,
Here you can see the solenoid that switches the exhaust from muffled to un-muffled.
Click here to go to next page.