Return to page 1
The rear shock bracket is installed and the shocks bolted up to the 9" Ford rear.
Here's the rear SVO disc brake setup.
Richard braced the body from side to side to keep the body from flexing out of shape when the floor is removed.
The old rusty floor is gone now.
Now we'll begin installing the new floor pans, tie them into the rear floor and the new firewall.
The floor panels are going in and it's starting to take some shape.
The rear floor panels are being tacked into place.
The firewall has been welded in and smoothed. Now the floor is being welded in.
The wheels and tires have been put on and the chassis is coming together.
The rear sway bar has also been installed.
Here's the completed front suspension with the sway bar.
All the weld seams are being seam sealed.
Here's a picture of the rear brake lines being run.
Brake lines running from the master cylinder with 2 two pound residual valves.
The body has been lowered back on the chassis and the engine installed.
Our work is completed and it's ready to be picked up.
Nancy sent Randy down to pick up her car. Here it is loaded up and ready to leave.