Return to Page 7 Go to Page 9
Now he's happy.
Went around the tail pan.
This car also has suicide doors so it fits a little different. You can tighten the gap up between the door and the hood, because the door swings out rather than inward.
A little roll on primer and a little sanding.
He has taken it apart again and getting ready to final sand & prime.
Now he has put the body on the dollie.
The chassis is ready to go the fabrication shop for some final welding.
We are going to start welding on the roll bar mounts.
We will completely weld them up, put bungs in them and seal the ends.
Brake lines are done and frame is ready to be taken apart.
Inner fenders are getting ready for primer.
Glassing in roll bar mounts.
Waiting to be primed and sealed.
We tinted the primer and the sealer with the same color as the car so if it gets chipped it won't show