|
SMALL BLOCK CHEVY LONG WATER PUMP SERPENTINE |
|
Click For
Bigger Picture
Click
Here For Dimensions
|
High Mount Alternator & A/C
Compressor Brackets
This serpentine system
is set up for use with Chevrolet steel pulleys and a reverse
rotation LONG WATER PUMP. Brackets bolt to the head and top water
pump bolt holes. The alternator bracket will fit all 1969 and new
heads. The A/C compressor bracket fits all GM aluminum heads
and may be used on 1969 thru 1986 cast iron heads by drilling and
tapping one hole for the upper mounting point. Will clear up to 3
inch center bolt valve covers when used on 1987 or later heads.
Will clear up to 3-3/4 inch tall valve covers when used on 1986
and earlier heads.
High Mount Alternator & A/C
Brackets #305 - $175.00
|
|
|
Click For
Bigger Picture
Click
Here For Dimensions
|
High Mount Alternator & A/C
Compressor Brackets
This serpentine system
is set up for use with Chevrolet steel pulleys and a reverse
rotation LONG WATER PUMP. Brackets bolt to the head and top water
pump bolt holes. These brackets will fit all 1987 and later cast
iron heads, including the Vortec heads. Will clear up to 3
inch center bolt valve covers.
High Mount Alternator & A/C
Brackets #306 - $175.00
|
|
|
Click For
Bigger Picture
Click
Here For Dimensions
|
Low Profile Alternator & A/C
Compressor Brackets
Designed for vehicles
with low hood clearance and wide engine compartments - trucks,
'50-'60's cars, Vettes and Camaros. LONG WATER PUMP
serpentine system was designed for use with factory Chevrolet
steel pulleys and a reverse rotation LONG WATER PUMP. These
bracket bolt to the head and top water pump bolt holes. The
alternator will fit all 1969 and newer heads. The A/C compressor
bracket fits all GM aluminum heads and may be used on 1969 thru
1986 cast iron heads by drilling and tapping one hole for the
upper mounting point. Brackets comes complete with idler assembly
and CNC machined aluminum idler pulleys with double row bearings.
Low Profile Alternator & A/C
Brackets #307 - $290.00
|
|
|
Click For
Bigger Picture
Click
Here For Dimensions
|
Low Profile Alternator & A/C
Compressor Brackets
This serpentine system
is set up for use with Chevrolet steel pulleys and a reverse
rotation LONG WATER PUMP. Brackets bolt to the head and top water
pump bolt holes. These brackets will fit all 1987 and later cast
iron heads, including the Vortec heads. Brackets comes complete
with idler assembly and CNC machined aluminum idler pulleys with
double row bearings
Low Profile Alternator & A/C
Brackets #308 - $290.00
|
|
|
Click For
Bigger Picture
Click
Here For Dimensions
|
Power Steering Bracket
Power steering bracket
for Alan Grove Components long water pump serpentine kits.
Uses attached reservoir Type 2 steering pump used on Chevrolet
applications from 1975-'78.
Power Steering Pump Bracket
#408L - $65.00
This bracket only works with
Part Numbers 305, 306, 307, 308
|
|
