T-Shirts!
   
  Construction
  Completed Cars
  The Gang
  Tech Stuff
  Services
  Rods For Sale
  Photo Gallery
  Build A Rod
  Package Deals
  Build Sheets
  Show Dates
  Customer Cars
  Links
  Hot Rod Art
  Location
  Catalog Index
  Contact Us
  About Us
  Feedback
  Shipping Info
  Home

   

   
 

Order Line

 

888-680-1932

   
 

Tech Line

 

931-680-0010

   
   

888-680-1932 Order Line


Small Block Chevy Short Water Pump

New Products

 


Click for larger view
Click Here For Dimensions

These brackets are the same as our original 113/213 low profile brackets, but sit 1" lower to provide extra room when needed. Compressor and alternator brackets are also available for opposite sides.

Part # 113R Low-A.C. (short pump)-$87.00
Part # 113L Low-A.C. (short pump)-$87.00

Part #213L Low-Alt. (short pump)-$87.00
Part # 213R Low-Alt. (short pump)-$87.00



Click for larger view
Click Here For Dimensions

These brackets were designed for '62 and earlier Corvettes. Bolts to the water pump and exhaust while still allowing the use of the factory front motor mount. Compressor and alternator brackets are also available for opposite sides.

Part #113R SC-A.C. (short pump)-$87.00
Part # 113L SC Low-A.C. (short pump)-$87.00

Part #213L SC-Alt. (short pump)-$87.00
Part # 213R SC Low-Alt. (short pump)-$87.00

   


Click For Bigger Picture


Click For Bigger Picture
Click Here For Dimensions

High Mount Alternator & Compressor Brackets
Air Compressor Bracket #100R - $85.00 ea.

Alternator Bracket #200L- $75.00 ea.




Click For Bigger Picture
Click Here For Dimensions

Extra Clearance
Designed for use with Tri-Powered Carbs, Dual-Quad Carbs etc.  Will clear tall valve covers.
Air Compressor Bracket  102R - $90.00 ea.

Alternator Bracket 202L - $75.00 ea.



Click For Bigger Picture
Click Here For Dimensions

Tuned Port Injected System Brackets
Works well with most induction systems, will clear multiple carbs, fuel injection. Alternator bracket fits all '69 & newer heads.  Clears 3 inch tall center bolt valve covers on '87 & later heads.  Clears 3-3/4 inch tall valve covers on /86 & earlier heads.
Air Compressor Bracket 128R - $85.00 ea.

Alternator Bracket 228L - $85.00 ea.



Click For Bigger Picture
Click Here For Dimensions

Tuned Port Injected System Extra Tall Brackets
Brackets similar to the 128R & 228L, but sits 1 inch higher to clear valve covers up to 4-1/2 inches tall when used with '86 or earlier heads.  Bolts to heads & water pump, some drilling & tapping may be required for one hole on upper mounting point.
Air Compressor Bracket 112R - $85.00 ea.

Alternator Bracket 212L - $85.00 ea.



Click For Bigger Picture
Click Here For Dimensions

Vortec Heads Brackets
Designed for '87 & later cast iron heads using  5/16" intake bolts that point straight down. Clears 3 inch tall valve covers.
Air Compressor Bracket 129R - $85.00 ea.

Alternator Bracket 228L - $85.00 ea.



Click For Bigger Picture

Chevrolet LT1 Brackets
Chevrolet LT-1 '92-'96.  Camaro-Firebird & Impala engines with 1-5/16 inch thick balancer, Corvette engines with 2-1/8 inch thick balancer.  Factory components will not work with these brackets.  For use on Sanden 508 compressor, & GM 10Si1, 12S1 or CS130 alternators with center to center mounting points of 6-9/16 inches.

Comp/Alternator - Camaro/Firebird #303 - $300.00

Comp/Alternator - Corvette #304 - $300.00

Power Steering - Camaro/Firebird #405L - $60.00

Power Steering - Corvette #406L - $60.00



Click For Bigger Picture
Click Here For Dimensions

Low Profile Vette/Camaro
Brackets bolt to the water pump and exhaust. 
NO HOLES NEEDED. 
Air Compressor Bracket #113R - $87.00 ea.

Alternator Bracket #213L - $87.00 ea.



Click For Bigger Picture
Click Here For Dimensions

Low Profile
Designed for low hood clearance - Trucks 50-60's, Cars '69 and newer.
Air Compressor Bracket #132R - $85.00 ea.

Alternator Bracket #232L - $85.00 ea.



Click For Bigger Picture
Click Here For Dimensions

Low Profile Vette/Camaro
Designed for low hood clearance 1987 and later cast iron heads including VORTEC heads.  VORTEC heads use 5/16" intake bolts that point straight down.
Air Compressor Bracket #133R - $85.00 ea.

Alternator Bracket #232L - $85.00 ea.


 

 
Click For Bigger Picture
Click Here For Dimensions

Power Steering
Designed for the Chevrolet Saginaw non-metric power steering pump with the attached reservoir.  Allows clearance for the alternator belt no matter where the alternator is mounted.  Short water pump applications are normally driven off a 3 groove crankshaft pulley.

#400L - $65.00 ea.


Type 2 Remote Reservoir Pump
Designed to be used with the metric GM remote reservoir type 2 pump. WILL NOT WORK WITH LOW PROFILE BRACKETS. Pump is driven off the outer groove of a 3 groove crank pulley.
Dimensions
#409L - $65.00


Back to Brackets

©1997 - 2007 Street Rods by Michael

New Visions Internet

Used Parts Central