|
|
|
'55 - '57
Chevrolet
Parts
|
|
|
|
Product does not come painted
|
2 Inch Drop
Steel Spindles
Full steel 2 inch drop
spindles, stronger than cast iron, use your stock steering arms
with no loss of turning radius. No realignment required. Sold in
pairs
2" Dropped
Spindles - SP-102 - $339.00
2" Dropped Spindles (69-72 Calipers) - SP-102-B - $349.00
|
|
|
|
Power Booster & Dual Master
Cylinder
Designed for use with HEIDTS Disc
Brake Kits-Fully assembled, plumbed and ready for installation.
Kit Includes:
Power Booster
Dual Master Cylinder
Proportionate Valve (Disc/Disc or Disc/Drum)
Manual Brake Master Cylinder - $175.00
Disc/Drum - DB-103
Disc/Disc - DB-103-D
Power Booster w/Master Cylinder - $299.00
Disc/Drum - DB-116
Disc/Disc - DB-116-D
|
|
|
|
Disc Brake Kits
Late GM or Early GM
calipers to complete the 2" Dropped Spindle installation
(Spindles not Included).
Kits Includes:
Rotors
Calipers w/Pads
Bearings & Seals
Spindle Nuts
Dust Caps
Hoses & Banjo Bolts
10.5" Rotors-B-Body Single
Piston Calipers for HEIDTS Spindles - DF-203 - $289.00
10.5" Rotors-A-Body Single Piston Calipers HEIDTS Spindles -
DF-203-B - $299.00
11" Rotors-A-Body Single Piston Calipers for Stock Spindles -
DF-204 - $350.00
|
|
Moves wheel out 13/16" from stock
location
|
|
Disc Brake Conversion Kits
This kit updates early
stock spindles disc brake kit to HEIDTS 2" Spindles. Spindles
not included.
Disc Brake Kits Includes:
Rotors
Calipers w/Pads
Bearings & Seals
Spindle Nuts
Dust Caps
Hoses & Banjo Bolts
11" Wilwood Drilled Rotors-4
Piston Pol Calipers & Hardware - DF-205 - $925.00
**
11" Wilwood Drilled Rotors w/Pol Hubs-4 Piston Pol Calipers
& Hardware - DF-205-D - $1,080.00
12" Wilwood Drilled Rotors w/Pol Hubs-4 Piston Pol Calipers
& Hardware - DF-210-D - $1,120.00
13" Wilwood Drilled Rotors w/Blk Hubs-4 Piston Blk Calipers
& Hardware - DF-211-D - $2,025.00
** For HEIDTS Dropped Spindles
|
|
|
Misc. Brake Parts
11" Caliper
Bracket Kit for Wilwood Calipers - DF-105 - $75.00
12" Caliper Bracket Kit for Wilwood Calipers - DF-106 - $75.00
Caliper Bracket Kit for Stock Spindles - DF-104 - $99.00
Chevelle Calilper Set (78-94) - DF-009 - $115.00
10.5" Chevelle Rotors (79-81) - DF-019 - $120.00
11" Chevelle Rotors (69-72) - DF-046 - $120.00
|
|
|
|
Tubular Upper Control Arms
Plain Control Arms - CA-201 -
$390.00
Plain Control Arms w/6 Deg of Add'l Caster - CA-201-6 - $390.00
Narrowed Plain Control Arms - CA-201-N - $390.00
Narrowed Plain Control Arms w/6 Deg of Add'l Caster - CA-201-N-6 - $390.00
Polished SS Control Arms - CA-201-SS - $730.00
Polished SS Control Arms w/6 Deg of Add'l Caster - CA-201-SS-6 - $730.00
Narrowed Polished SS Control Arms - CA-201-SS-N - $730.00
Narrowed Polished SS Control Amrs w/6 Deg of Add'l Caster - CA-201-SS-N-6 - $730.00
Sold In Pairs
|
|
|
|
Tubular Lower Control Arms
Plain Control Arms - CA-203 - $710.00
Plain Control Arms for Coil Over Shocks - CA-203-M - $710.00
Narrowed Plain Control Arms for Coil Over Shocks - CA-203-N-M - $710.00
Polished SS Control Arms - CA-203-SS - $1,345.00
Polished SS Control Arms for Coil Over Shocks - CA-203-SS-M - $1,345.00
Narrowed Polished SS Control Arms for Coil Over Shocks -
CA-203-SS-N-M - $1,345.00
Sold In Pairs
|
|
|
|
Ball Joint Caps & Bushing
Caps
SS Ball Joint Caps
CA-210 - $60.00 Pair
Polished Bushing Caps CA-211 - $180.00 Set*
* 8 Caps per Set
|
|
|
|
Coil-Overs
Billet aluminum
coil-over shocks are fully adjustable for ride height and
dampening. Specifically designed full length conical springs are
powder coated bright silver. Two progressive spring rates for big
or small block engines. Fits coil-over arms or stock application.
55-57 Chevy Coil-Over Shocks - CB-120 - $329.00
450# 11" Silver Powder Coated Coil-Over Springs - Small Block
- CQ-450-11 - $150.00
550# 11" Silver Powder Coated Coil-Over Springs - Big Block -
CQ-550-11 -
$150.00
1" Dropped Coil Springs
For that
"Shoebox" lower look HEIDTS 1" dropped coil springs
with HEIDTS 2" dropped spindles will put your cruiser a full
3 inches into the weeds safe and easy.
1" Dropped Coil Spring (Factory Style) - CS-060- $99.00
Fitted Spanner Wrench - TA-002 - $12.00
Adjustable Spanner Wrench - TA-001 - $16.00
|
|
|
Front Stablizer Bar
Kit
|
Rear Stablizer Bar Kit
|
|
Sway Bar (Stabilizer Bar Kits)
7/8" Front Sway
Bar
w/Urethane Bushings - SB-050-U - $159.00
1" Front Sway Bar w/Urethane Bushings - SB-051-U - $159.00
7/8" Rear Sway Bar w/Urethane Bushings - SB-052 -
$169.00
|
|
|
|
|
|
|
|
|
|
Back
to HEIDTS
|
|
|
|
|
|
|
|
|
888-680-1932
Order Line |
|
|
|
|
|
|
|
|
