|
|
|
Hose Kit
All kits include adequate
hose length to connect complete system, all O-ring fittings,
crimp ferrules, 134A fittings with service ports and standard
black dryer.. Hose lengths include 6 foot #6 hose, 4 foot #8
hose and 5 foot #10 barrier hose. Extra lengths available upon
request.
Barb Fitting Hose Kits
Hose kit without dryer 134A - 31702-VUD - $100.00
Hose kit with dryer 134A - 31700-VUD - $109.00
Beadlock Fitting Hose Kits
Hose kit without dryer 134A - 31703-VBD - $100.00
Hose kit with dryer 134A - 31700-VBD - $109.00
Extended Length Beadlock Hose
Kits
Includes 10 foot #6, 6 foot #8 and 9 foot #10 barrier hose.
Hose kit without dryer 134A - 547000 - $125.00
Hose kit with dryer 134A - 547001 - $130.00
|
|
|
|
Stainless Steel
A/C Line Kit
Straight SS tubing
72" #6, 36" #8 and 72" #10 tubing, tube ends with
SS TiteFit nuts, one foot each of SS Aeroquip #10 & #8 line
with straight fittings and a Proline A/C bulkhead plate.
Proline line kit 134A without bulkhead - 31201-VUQ
$420.00
Proline line kit 134A with 2-way bulkhead - 31202-VUQ
$445.00
Proline line kit 134A with 4-way bulkhead - 31203-VUQ
$470.00
|
|
|
35135-VUQ-A
35136-VUQ-A
35147-VUQ-A
|
TiteFit Aluminum
Hard Line Kits
Creates compact looking
refrigerant line routing down and close to the engine. Kits with
Proline TiteFit nuts built into line (VUQ numbers) come fully
polished and include machined aluminum line clamps.
Pre-1935 vehicle 134A - 35135-VUQ-A - $60.00
1935 & up vehicle 134A (top mounted steel compressor bracket
- 35136-VUG-A - $40.00
1935 & up vehicle 134A - 35137-VUQ-A -
$40.00
|
|
|
|
4-Way Square for
A/C & Heater O-Ring Lines
ProLine machined aluminum
bulkhead plates creates a professional look and reduces the
possibility of scratching paint. Panel is 3 inches x 3.187
inches.
4-way A/C-heater (6-10 male
O-ring) 34217-VUQ
4-way A/C-heater (8-10 male O-ring)
34017-VUQ
$99.00
|
|
|
|
4-Way Inline for
A/C & Heater O-Ring Lines
ProLine machined aluminum
bulkhead plates creates a professional look and reduces the
possibility of scratching paint. Panel is 3 inches x 3.187
inches.
4-way A/C-heater (6-10 male
O-ring) 34217-VUQ - $99.00
|
|
|
 
|
4-Way Square for
A/C & Heater O-Ring Lines
Streamline polished or
black anodized aluminum bulkhead plates with a lower profile
creates a professional look and reduces the possibility of
scratching paint. Panel is 3 inches x 3 inches.
Polished Aluminum
4-way A/C-heater (6-10 male O-ring) 384600-MBA
4-way A/C-heater (8-10 male O-ring) 384800-MBA
$65.00
Black Anodized
Aluminum
Polished Aluminum
4-way A/C-heater (6-10 male O-ring) 389600
4-way A/C-heater (8-10 male O-ring) 389800
$69.00
|
|
|
|
 
|
4-Way Diamond for
A/C & Heater O-Ring Lines
Streamline polished or
black anodized aluminum bulkhead plates with a lower profile
creates a professional look and reduces the possibility of
scratching paint. Panel is 2.75 inches x 4.375 inches.
Polished Aluminum
4-way A/C-heater (6-10 male O-ring) 388600-MBA
4-way A/C-heater (8-10 male O-ring) 388800-MBA
$65.00
Black Anodized
Aluminum
Polished Aluminum
4-way A/C-heater (6-10 male O-ring) 389601
4-way A/C-heater (8-10 male O-ring) 389801
$69.00
|
|
|
|
4-Way Inline for
A/C & Heater O-Ring Lines
Streamline polished or
black anodized aluminum bulkhead plates with a lower profile
creates a professional look and reduces the possibility of
scratching paint. Panel is 1.25 inches x 5.75 inches.
Polished Aluminum
4-way A/C-heater (6-10 male O-ring) 386600-MBA - $65.00
4-way A/C-heater (6-10 male O-ring) 389804 - $69.00
|
|
|
|
|
|
|
