Dick Clark wanted a '32 Ford Sedan. But, there's no real good source for them anymore. So we're doing the next best thing. We got a '34 Sedan body from Redneck Street Rods and we're going to modify the front to take a '32 front end.
The body just arrived from Redneck.
While we're waiting on the custom framerails, we'll start modifying the cowl. We start by grinding the gelcoat on the cowl and sides.
Now the fiberglass is ground down.
The beltline is duplicated with fiberglass. No bondo was used for this step.
Here's the completed cowl.
The framerails are going in the jig to start the chassis buildup.
First we need to get the chassis centerline. We do this by running a string down the center of the entire length of the jig. Since these are custom rails, (34 in the back, pinched 32 in the front) we'll need to custom jig the front of the rails.
Now we'll cut the rear of the frame off and move it in.
Here's the frame all back together and welded up.
Next we install the Heidt's front crossmember and begin installing the A-arms and brakes.
The Wilwood front brakes are on.
| 06/14/2023 Dear Customers, due to the unexpected passing of Street Rods by Michael's founder and automotive legend Michael Young, we are temporarily suspending all phone and website ordering until further notice, as we grieve his loss and try to regroup. We apologize for any inconvenience this may cause and ask that you please be patient as we deal with this devastating loss. Michael’s impact on the automotive and music world was immense and he will be missed dearly. Thank you for your understanding. |
