The front crossmember has been removed.
Next we will be removing the steering column.
Here's what the steering column looks like from underneath.
A closer look at the steering column.
Steering column has been removed.
The starter switch is removed.
The old wires under the dash will be removed and replaced with all new wiring.
Next these gauges will be removed.
Now we will remove the master cylinder.
More wiring that will be replaced.
This shifter will be removed and replaced.
A look at the exhaust tips.
The exhaust will be removed next.
The front crossmember center line is measured and marked.
Boxing plate is tacked in place for the front crossmember.
Front boxing plates welded in place.
...and ground smooth.
Front crossmember is installed.
Upper and lower A arms installed along with the spinals.
Inner fender well marked and ready for trimming to make room for the upper A arms.
The inner fender all trimmed up and ready for the upper A arms.
