Outer fender wells are being trial fitted.
After the trial fit the front fenders are removed.
A look at the front fenders after removal.
As you can see there are some spots on the fenders that need to be taken care of.
Roll prime was used on the front fenders after all the holes were fixed.
Closer view of the fender after being roll primed and sanded smooth.
Another view of the fender after another coat of primer.
A look at the firewall before the removal of all the wires.
All the old wires are removed from under the dash.
A view of the truck body before it's removed.
Running boards removed.
Truck bed removed.
Here's a look at the frame after the bed was removed.
A look at the rear fenders that have been removed.
Both doors are removed and getting prepped for paint.
The new front crossmember and top hats are welded in place.
A look at the other side of the front crossmember.
The whole front crossmember and frame are painted to help prevent rusting.
Here's a look at the front-end after the suspension is reassembled.
